Sodium-ion battery 12 V 100 Ah (winch operation)

Leak-proof battery that is non-flammable due to its cell chemistry.

The battery can be used to operate winches or large loads with a maximum output of 360 A. Due to the high charge and discharge rate, the battery is quickly fully charged again after the winch load and ready for the next use. The battery is deep-cycle capable and has deep discharge protection, which means it can withstand a discharge down to the cut-off point, e.g. at 6 V depending on the battery type, without being damaged. In addition, it is mechanically robust and vibration-resistant, making it perfectly suitable for off-road use, and can withstand impacts and inclinations. The integrated battery management system (BMS) monitors the condition of the battery: temperature control, overvoltage protection, short-circuit protection, overload protection, and undervoltage protection. The battery has a main battery switch so that there is no self-discharge during downtimes, but the battery can still be charged at any time. The battery as a whole has a self-consumption of less than 2% per month. Due to the wide temperature range of -40°C to 70°C, the battery does not require heating or cooling, thus offering above-average efficiency, as all energy is available to the consumers.

The battery has a full load capacity of up to 900 A for a maximum of 30 seconds. The battery can be monitored at any time via Bluetooth or app. A parallel connection of up to three batteries of the same type in this series is possible. A serial connection is not possible.